Model 3 accessories – E-Mobility Shop
Organizer for the center console of Tesla Model 3 and Tesla Model Y - model year 2021 / 2022 / 2023
So that there is no noise when small parts slide back and forth, subdivisions are provided and the surface is flocked.
There are several compartments for e.g. coins (for the shopping trolley etc.) for the key card and other items.
Please note:
This organizer fits in the modified center console with the sliding mechanism (from around September 2020)
This organizer does not fit the center console with the folding mechanism (i.e. the status before August 2020).
Welcome light with Tesla logo as entry light for Tesla Model S, 3, X and Y.
When the door is opened, the logo appears on the floor.
The latest batch is designed with a metal-reinforced case. This makes the LED light even more robust.
Very easy installation by replacing the existing light, easy to do even for the layman without specialist knowledge. We enclose installation instructions with the delivery.
The set consists of 2 entrance lights with logo and two plastic lever tools are included with each order.
The Tesla Model S, 3, X and Y have a camera installed above the mirror for the interior.
With this camera cover you have the choice to protect your privacy.
Simply slide the slider in front of the camera and privacy is assured.
This camera cover can also be used on laptops and is not limited for use in the Tesla Model 3 or Y.
The camera is in the bracket above the mirror.
The self-adhesive back makes installation extremely easy and the cover can also be removed without leaving any residue.
Jack Pad lift mount for the Tesla Model S, 3, X and Y (4 pieces as a set)
Not all workshops and tire services have the right mounts to lift the Tesla Model S, 3, X and Y without damaging the battery.
This is why these lifting platform recordings should be stowed in the trunk (e.g. in the cable compartment below the trunk) so that you are always well prepared for a visit to the workshop. The recording also works with standard jacks.
- Solid metal construction with protective rubber ring
- Geruchsneutral
- Set of 4 with pouch
Significantly brighter light in the entry area and in the trunk thanks to the LED lights, suitable for Tesla Model S, 3 and X as a set of 2.
Please note: the LEDs do not fit in the trunk of the Model Y because round lights are installed there. However, these LEDs fit in the doors and in the footwell.
These LED lights have 18 LEDs instead of a single LED in the original LED light, making them significantly brighter.
Quick installation by simply replacing the existing lights within a minute. The mechanical dimensions are the same.
Box contents: 2 LED lights
Plastic lever tools are included per order.
End-to-end dashboard strip and the door panel side parts for the Model 3 and Y built from 2021 made of real carbon in satin finish.
Shipping is in two separate deliveries, since the dashboard bar has to be sent as bulky goods due to its length. The bulky goods shipment can then entail somewhat longer shipping times and therefore arrive somewhat delayed.
The carbon elements are attached with adhesive strips. During installation, please ensure that the surface to be glued is clean and free of grease.
Small organizer box under the armrest with a passage to reach the cigarette lighter.
So that there is no noise when small parts slide back and forth, subdivisions are provided and the surface is flocked.
There are several compartments for e.g. coins (for the shopping trolley etc.) for the key card and other items.
DUAL MOTOR logo for Tesla available in three variants:
Silver with red underscore or
Black with a black or red underline.
Self-adhesive 3D letters with a red underline, which stands for the performance model at Tesla. In this context, dual motor means all-wheel drive, since there is one motor at the front and one at the rear, where it drives the respective axle.
The assembly is made possible by the self-adhesive letters and the positioning aid (the letters are attached to a transparent film on the top.
For assembly, simply clean the underside well, align the logo and stick it on. Then pull off the transparent film - done.
The set consists of the logos for the front frunk hood, the rear trunk hood and the steering wheel.
Available in three finishes: black, matt black and carbon look
The logo covers only fit the Model 3.
They also fit the size of the Model S, but the logo is deeper, so that the cover does not reach the paintwork and floats in the air.
Air mattress suitable for many cars, such as Tesla Model S, 3, X and Y.
A 12V electric air pump is included. This allows the air mattress to be inflated perfectly.
Non-slip performance pedal pads for the Tesla Model 3 and Y - from 2022
(without the cross of the older versions).
2-piece for power pedal and brake
Stainless steel with non-slip rubber bumps for safe operation without slipping.
Easy assembly in just a few minutes.
Note: No ABE or parts certificate, we recommend individual acceptance by the TÜV
Cup holder for the center console of Tesla Model 3 and Y
This means that the cups and bottles no longer wobble around and are fixed.
The product is made of rubber
Below the armrest of the Tesla Model 3 and Y there is a cavity that can be used as a hiding place for smaller valuables.
The secret compartment box is simply swept in there. The adhesive pads make this very quick and easy.
The compartment can be opened using a sliding mechanism and small items that should not be lying openly in the car can be stowed there.
The box has the inside dimensions of 12cm x 13.5cm and
the opening measures 10.5 cm x 4.5 cm
Center console foil for Tesla Model 3 and Y - from model year 2021 Refresh Model 3
This film looks good and protects the center console surface from scratches.
Colour: carbon look or matt black
The film can be easily attached with the enclosed cleaning cloths and can be removed without leaving any residue if necessary.
TESLA lettering made of self-adhesive 3D letters
Available in silver and black.
Thanks to the positioning aid, the self-adhesive letters can be mounted very easily.
Ventilation grille for the Model 3 - suitable for all current Model 3, including 2023 Model 3
The ventilation grille prevents leaves and other larger objects from entering the ventilation duct.
If leaves penetrate there, they cause unpleasant noises there and, in the worst case, can clog the cabin filter.
This is prevented with this ventilation grille.
Optimum fit and easy assembly within a minute.
The ventilation grille is only glued in place and can be removed without leaving any residue if required.
Screen protector for Tesla Model 3 and Y in MATT
The dark one in the photos is just the backing sheet. The actual protective film is transparent, untinted and matt.
Made in Germany
Easy to attach with the included cleaning material and the screen protector can also be removed without leaving any residue if necessary.
Size: 15 inches
Significantly brighter light in the entry area and in the trunk thanks to the LED lights, suitable for Tesla Model S, 3, X and Y as a set of 2.
The colors blue, red, green, purple and amber are available.
These LED lights have 18 LEDs instead of a single LED in the original LED light, making them significantly brighter.
Quick installation by simply replacing the existing lights within a minute. The mechanical dimensions are the same.
One color LED light is included in the package.
A plastic lever tool is included with each order.
Shop Genuine & Authentic BMW UK Car Accessories
TGA Mobility Mobility Scooters, New and Used Disability Scooters UK
Mobility Scooters Buy Mobility Scooters - Complete Care Shop
Hyundai KONA Electric, Genuine Accessories
Explore Expansive Portfolio of EV Connectivity Solutions
Roma Medical mobility scooter spares and accessories — Discount Scooters ( Mobility Spares)
How 3 Years With A Tesla Model 3 Almost Made Me Forget About The Mobility Revolution - CleanTechnica
Best Mobility Scooters: Collapsible & Folding Mobility Scooter Reviews - Which?
Mobility Scooters for sale
Monarch Mobility – Monarch Mobility
Mobility Scooters for Seniors - Zipr Mobility